Millipak Express 40 Final Filter, 0.22um

SKU:
MPGP04001
  • $293.00

    • Description

    Millipak Express Filter

    0.22 µm membrane filter for particulate-free and bacteria-free water at the point of dispense, For use with Elix Advantage and Milli-Q Advantage A10 / Direct / Integral / Reference systems

    Synonym(s):
    Millipak Express 40 Filter
    eCl@ss:
    33050190
    NACRES:
    JA.14

    material

    filter (polyethersulfone)
    styrene-acrylonitrile (SAN) housing

    sterility

    non-sterile

    feature

    removal of particulates and bacteria

    manufacturer/tradename

    Millipak®

    matrix

    Durapore®

    pore size

    0.22 μm pore size

    compatibility

    for use with Elix® Advantage
    for use with Milli-Q® Advantage A10
    for use with Milli-Q® Direct
    for use with Milli-Q® Integral
    for use with Milli-Q® Reference

    shipped in

    ambient

    The Millipak® 0.22 μm hydrophilic membrane filter produces particulate- and bacteria-free water at the point of dispense of the Milli-Q® Integral, Milli-Q® Advantage A10, Milli-Q® Direct, Milli-Q® Reference and Milli-Q® Reference A+ water purification systems. The filter is designed with a 0.22 μm PES (polyethersulfone) asymmetric membrane filter, heat-sealed on a styrene acrylonitrile housing. This minimizes organic and inorganic extractable release.

    Application

    Provides filtered water suitable for most analytical techniques used in the laboratory (e.g., preparation of solutions used in spectrophotometry, pH measurement, titrations, atomic absorption, Kjeldahl analysis, and HPLC).

    Features and Benefits

    • The membrane is supported by a rigid plastic disc with channels that ensures high water flow and resistance to pressure variations without the risk of membrane rupture.
    • Millipak® membrane filters use the unique, clean stacked disc design, allowing minimal hold-up volume and particle shedding.
    • The filters are designed with a 0.22 μm PES (polyethersulfone) asymmetric membrane filter heat-sealed on a SAN (styrene acrylonitrile) housing.
    • The membrane′s conical pores allow a high flow rate at a low differential pressure.
    • The membrane, housing material and production processes have been selected to minimize organic and inorganic extractable release.
    • Connects to the outlet of the water delivery point, such as the PODs of Milli-Q® water purification systems.
    • The protective bell protects against intrusion of airborne bacteria contamination during dispensing.
    • Each filter is individually tested and delivered with a Certificate of Quality.
    • Care-free maintenance: the filter is easily fitted and replaced.

    Components

    0.22 μm membrane filter

    Other Notes

    Directions for Use

    • Organism Retention: Microorganisms
    • Mode of Action: Filtering
    • Application: General laboratory analysis
    • Intended Use: Water purification
    • Instructions for Use: This item provides water filtered through 0.22 μm sterilizing-grade membranes, and is considered to be a pesticide device under FIFRA . Refer to system equipment user guide section "Using the System" (available on USB key in the system box)
    • Storage Statement: Store in dry location
    • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

    Legal Information

    Durapore is a registered trademark of Merck KGaA, Darmstadt, Germany
    ELIX is a registered trademark of Merck KGaA, Darmstadt, Germany
    MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany
    Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany