MF-Millipore Membrane Filter, 0.22um pore size 47 mm diameter, mixed cellulose esters (MCE) membrane, hydrophilic, white, 100 discs

SKU:
GSWP04700
  • $195.00

    • Description

    MF-Millipore Membrane Filter, 0.22 µm pore size 47 mm diameter, mixed cellulose esters (MCE) membrane, hydrophilic, white, 100 discs

    Quality Level

    400

    material

    mixed cellulose esters (MCE) membrane
    plain filter
    white filter

    sterility

    non-sterile

    feature

    hydrophilic

    manufacturer/tradename

    MF-Millipore®
    Millipore

    parameter

    18 mL/min-cm2 water flow rate
    2 L/min-cm2 air flow rate
    75 °C max. temp.

    filter diam.

    47 mm

    thickness

    150 μm

    gravimetric extractables

    2%

    refractive index

    n/D 1.51

    matrix

    MF-Millipore

    pore size

    0.22 μm pore size
    75 % porosity

    capacity

    150 μg/cm2 binding capacity (protein)

    bubble point

    ≥3.52 bar, air with water at 23 °C

    shipped in

    ambient

    Biologically inert mixtures of cellulose acetate and cellulose nitrate have made MF-Millipore membrane filters one of the most widely used membranes in analytical and research applications.

    MF-Millipore filters without Triton surfactant contain minimum amounts of wetting agent and have a lower water extractable content than standard MF-Millipore filters.

    Features & Benefits:
    - Versatile filter for biological and environmental monitoring applications
    - Available in a range of pore sizes, colored black or white, with or without a gridded surface
    - Compatible with ethylene oxide, gamma irradiation, and autoclave sterilization methods
    Filter Code: GSWP

    Application

    47 mm diameter, mixed cellulose esters (MCE) membrane, hydrophilic, white, 100 discs

    Other Notes

    Directions for Use

    • Organism Retention: Microorganism
    • Mode of Action: Filtration (size exclusion)
    • Application: General laboratory filtration
    • Intended Use: Retention or removal of biological contaminants
    • Instructions for Use: Sterilizing filtration of a liquid through a membrane with a 0.2 μm (or smaller) pore size effectively removes biological contaminants, including bacteria, mold and yeast. For the selective retention of larger biological contaminents, liquid filtration through membranes with 0.45 μm (or larger) pore sizes may be used to trap and support microorganism growth for subsequent culture and analysis
    • Storage Statement: Store in dry location away from heat source
    • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

    Legal Information

    MF-Millipore is a registered trademark of Merck KGaA, Darmstadt, Germany

    Pictograms

    GHS02

    Signal Word

    Danger

    Hazard Statements

    H228 - H412

    Precautionary Statements

    P210 - P240 - P241 - P273 - P280 - P370 + P378

    WGK Germany

    WGK 3