Description
Rtx-5 (G27) Columns (fused silica)
low-polarity phase; Crossbond diphenyl dimethyl polysiloxane
- General-purpose columns for drugs, solvent impurities, pesticides, hydrocarbons, PCB congeners (e.g., Aroclor mixes), essential oils, semivolatiles.
- Equivalent to USP G27 and G36 phases.
Similar Phase(s):
HP-5, DB-5, CP-Sil 8 CB, ZB-5
Product Name:
Rtx-5
Temp. Limits:
-60 to 330 °C
Similar To:
Agilent 122-503E; Phenomenex 7HG-G002-17; Varian CP7759; Grace 13309, 8635220
Length:
30 m
Internal Diameter:
0.25 mm
df (µm):
0.50 μm
The advantages of the Merlin Microseal septum include elimination of septum coring, longer life, and consistently low needle-insertion force. The Microseal septum incorporates two separate sealing mechanisms. These sliding seals eliminate septum coring and the resulting accumulation of septum crumbs in the injection port liner.
The Microseal septum uses a 23-gauge (0.63 mm, 0.025") needle or probe with a blunt, truncated conical tip. Because the syringe plunger end details are determined by manual or autosampler compatibility, often a removable needle syringe is an effective way to match both of these requirements. No adaptor is required for the Thermo 1300 or 1310 inlet. Installation is simple, requiring no modification of the injection port.
Replacement Microseals for general-purpose (3 to 100 psi), low-pressure (1 to 45 psi), and SPME fiber (3 to 100 psi) applications are available. For use in SPME Arrow applications, a different nut/adaptor kit must be used; see Related Products.
The Microseal septum uses a 23-gauge (0.63 mm, 0.025") needle or probe with a blunt, truncated conical tip. Because the syringe plunger end details are determined by manual or autosampler compatibility, often a removable needle syringe is an effective way to match both of these requirements. No adaptor is required for the Thermo 1300 or 1310 inlet. Installation is simple, requiring no modification of the injection port.
Replacement Microseals for general-purpose (3 to 100 psi), low-pressure (1 to 45 psi), and SPME fiber (3 to 100 psi) applications are available. For use in SPME Arrow applications, a different nut/adaptor kit must be used; see Related Products.
-
RestekReplacement Inlet Seal for Thermo TRACE 1300/1310 GCs, 0.8mm ID, 10pk
SKU: 22232
$321.00Replacement Inlet Seals for Thermo TRACE 1300/1310 GCs Gold plating provides inertness similar to fused silica. All seals include washers. Product Name: Replacement Inlet Seal Similar To:... -
RestekTopaz 4.0 mm ID Single Taper Inlet Liner w/ Wool for Thermo TRACE 1300/1310 GCs equipped with SSL inlets (5pk)
SKU: 23447
$125.00Topaz 4.0 mm ID Single Taper Inlet Liner w/ Wool for Thermo TRACE 1300/1310 GCs equipped with SSL inlets Topaz GC inlet liners feature revolutionary technology and inertness to deliver you the next... -
RestekMake Life Easier (MLE) Capillary Tool Kit for Thermo TRACE 1300 GCs
SKU: 27216
$418.00Make Life Easier (MLE) Capillary Tool Kit for Thermo TRACE 1300 GCs Everything you need in one complete kit! Product Name: MLE Capillary Tool Kit Instrument: -
RestekViton O-Rings For Agilent, PerkinElmer 590/690, Thermo 1300/1310, and Varian 1177 GCs (50pk)
SKU: 22242
$59.00Viton O-Rings, For Agilent, PerkinElmer 590/690, Thermo 1300/1310, and Varian 1177 GCs Fit split (6.3 mm OD) or splitless (6.5 mm OD) liners. Product Name: O-Rings Similar To: Grace 7019, -
RestekShimadzu Plug Thermolite Plus Septa, 50-pk.
SKU: 23872
$100.00Shimadzu Plug Thermolite Plus Septa, 50-pk. Usable to 350 °C inlet temperature.* Ultra-low bleed minimizes background signal. New plasma coating eliminates sticking in the injection port...
