MAXEVAP Connection Kit

Reduce Purge / Dry Times Maximize Vapor Exit Path With Cascade’s MAXEVAP Connection Kit! Cascade’s CVO vacuum ovens offer two different vacuum oven connection points. The standard connection is a â…œ” dia barb located at the rear of the oven. When using the standard exit point and connection size all the outgassing material must find its way out via the â…œ” dia exit hole and interior plumbing and vacuum lines. For large batch, production level processing, pumping off this smaller â…œ” diameter plumbing and lines can slow the process down.

Features

• Stainless Steel KF-25 Flanges are machine installed to vacuum rated KF-25 vacuum tubing to insure exceptional vacuum integrity. Includes all KF-25 clamps and rings for connection
• Vacuum flex lines are 1″ diameter, NSF & USDA Food Grade Rated
• Clear tubing provides visibility into vapor path
• Vacuum lines have a smooth, (not bellowed) interior which prevents clogging & build up
• Includes 4′ of line from side mounted vacuum valve to pump
• Hand valve can be partially open/closed

• Stainless Steel KF-25 Flanges are machine installed to vacuum rated KF-25 vacuum tubing to insure exceptional vacuum integrity
• Includes all KF-25 clamps and rings for connection
• Vacuum flex lines are 1″ diameter, NSF & USDA Food Grade Rated
• Clear tubing provides visibility into vapor path
• Vacuum lines have a smooth, (not bellowed) interior which prevents clogging & build up
• Includes 4′ of line from side mounted vacuum valve to pump
• Hand valve can be partially open/closed

MAXEVAP Connection Kit

KF25 Vacuum Rated Hose – 2 lengths
1 each 6’ KF-25 hose from hand valve to pump inlet
1 each 3′ KF-25 hose from vacuum valve to pump

KF25 Stainless Tube Stub Flanges Installed – 4 each
Machine crimped on each end of hose
KF-25 Clamps – 4 each

KF-25 Centering Ring – 4 each

KF25 90° Elbow – 1 Each
Installs to oven’s KF-25 rear port

Vacuum Hand Valve – 1 each

Side Mount Bracket For Hand Valve -1 each
Can mount left or right side of oven

Hose Specifications

70 psi at 70F max pressure

Crystal clear Phthalate-Free PVC compound, formulated
with ingredients in compliance with applicable FDA(03)
requirements, meets USDA(18), 3A(01), NSF(13), UL(17), USP(19)
and RoHS(16) criteria. Reinforced with helically-wound
spring steel wire.

For even faster evaporation, purging or drying consider upgrading to the MAXEVAP connection kit.

The MAX EVAP connection kit secures to the ovens’ 1” dia KF-25 port located on the back center of the chamber.

The MAX EVAP connection never reduces flow by continuing with 1” diameter vacuum rated clear lines, a 1” dia KF-25 side mounted vacuum valve and KF-25 fittings and hardware.

The ovens’ KF-25 port can also be used to run temperature feedthrus, or monitoring sensors inside the vacuum chamber during processing.

MAX EVAP Connection Kit can be installed in the field as an add-on or upgrade. 

The connection kit has everything you need to connect directly to the Cascade oven. Current models of the TVO and CVO vacuum ovens have pre-set hole patterns to mount the upgraded vacuum valve on either the left of right side of the oven, for the best workflow design.