Thermo Scientific Barnstead D0800 Bantam Deionizer, 120V

SKU:
EW-99261-01

    • Description

    Thermo Scientific Barnstead D0800 Bantam Deionizer, 120V

    INCLUDES

    3 ft (0.9 m) of inlet feed tubing and four screws for wall mounting.

    MORE ABOUT THIS ITEM

    Use this nonpressure cartridge system for polishing pretreated water or single-stage deionization
    of tap water. Deionizer monitor indicates when it is time to change cartridges. When the monitor
    drops below the acceptable minimum purity, or when it registers in the 0.05 to 0.025 MΩ range, the cartridge should be replaced. Monitor shows resistivity of effluent from 25 to 18 MΩ-cm.

    Disposable cartridges (sold separately) are easily replaced by turning a thumbscrew.

    Deionizer mounts on benchtop or wall.

    Specifications & Description

    • ASTM Water GradePolishing pretreated water
    • Max Flow Rate (L/min)0.633
    • Max Flow Rate (L/hour)38
    • Max Flow Rate (GPH)10
    • Number of Holders1
    • Inlet Port1/4" OD compression
    • Max Inlet Water Temperature (° F)120
    • Min Inlet Water Temperature (° F)40
    • Max Inlet Water Temperature (° C)49
    • Min Inlet Water Temperature (° C)4
    • Min Inlet Pressure (PSI)5
    • Max Inlet Pressure (PSI)70
    • Min Inlet Pressure (bar)0.3
    • Max Inlet Pressure (bar)4.8
    • Power (VAC)120
    • Height (in)28.5
    • Depth (in)8.75
    • Width (in)6
    • Height (cm)72.4
    • Depth (cm)22.2
    • Width (cm)15.2
    • DescriptionBantam Deionizer, 120V

    INCLUDES

    3 ft (0.9 m) of inlet feed tubing and four screws for wall mounting.