Adapters

PP or PTFE/ETFE adapters are available in a wide range of sizes to fit most common lab bottles. PTFE/ETFE adapters offer higher chemical resistance such as for concentrated acids like HCL and HNO3. External Thread Bottle thread/Ground joint PPCat...

Ai 24/40 Thermometer Inlet Adapter with Sealing Gasket Glass material: high borosilicate glass 3.3. Glassware does not have warranties. Glassware may have minute blemishes that will not affect the function. If you believe there are imperfections on your...

Synthware™ distillation distribution adapter Joint: ST/NS 14/20 General description Rotating cow receiver allows four flasks to be progressively filled. PROPERTIES Joint joint: ST/NS14/20 packaging pkg of 1 ea ...

#7 PTFE bushing, 7.5mm center hole, (2) Fetfe o-rings Nylon or PTFE bushings for use with any #7 Ace-Thred. Solid bushings are not stoppers but are intended for drilling custom diameter holes.

7643-25 Pk3 60/50 PTFE sleeve   PTFE sleeves are inserted between standard taper ground glass joints. Precludes contamination from lubricant or from leaks. They have a wall thickness of about 0.05mm, are inert, usable to 280 degrees C and will...

5028-30 Adapter, #7 Ace-Thred top, 24/40 inner bottom, nylon bushing with Fetfe o-ring   Adapter with #7 Ace-Thred and inner or ball joint. Used for probes, thermometers, electrodes, etc.

Adapters, Vacuum, 24/40 Joint Vacuum adapters have 24/40 joints. Bent adapter has a 105° angle between the top outer joint and bottom inner joint. Straight adapter has a top outer joint and bottom inner joint. Both adapters have 24/40 joints and...

Ai PTFE 34/45 Joint Sealing Sleeve for Air Tight Vacuum Work   cross International PTFE 34/45 joint sealing sleeve for air tight vacuum operation. Designed with higher and lower bumps to enhance sealing. No-lip top allows you to put on your...

Drying tubes with joint Joint: ST/NS 24/40 NACRES: NB.43 material borosilicate glasscolorless capcolorless tube Joint Joint: ST/NS24/40 feature graduations: no L 125 mm The Aldrich drying tubes are made of borosilicate glass...

Precision Seal rubber septa white, 24/40 joints  eCl@ss 32119211    NACRES NB.35 Properties Related Categories Aldrich, Aldrich Septa Supplies, Labware, Manufacturer Browser, Precision Seal Septa,...

12731-22 Adapter,vertical tube compression,45/50,3/8in OD ground glass sidearm   Glass standard taper and spherical joint adapters featuring a vertical ground glass sidearm. The sidearm is used to make tube compression fitting connection to a...

Aldrich® straight vacuum-distilling adapter With side hose connection and drip-tip. Improves efficiency of evaporation of solvents under reduced pressure when placed between the condenser of a rotary evaporator and a chilled receiving flask...