COLDWELL Vacuum Cold Trap Vessel Fits MAXTRAP

The COLDWELL Vacuum Cold Trap Vessel for the MAXTRAP

Item No: V2-KF25

Patent-pending baffle system, 3 Quart Capacity. Keep vacuum purging while original trap is being reclaimed, cleaned, refreshed in conjunction with the MAXTRAP Mechanically Refrigerated Cold Trap. Cold traps can become full or the captured material freezes and blocks flow. For large volume, 24-hour processing, or vacuum purging it is recommended that a second, spare COLDWELL is purchased. The secondary COLDWELL can be dropped into place so processing continues while the full trap is cleaned, defrosted.

Stand Alone

For a low cost option, submerge the COLDWELL into a cold ice slurry bucket.

COLDWELL Includes:

• Cascade’s COLDWELL Vacuum Cold Trap – patent pending baffle system
• 3 Quart Capacity (2839mls)
• Interior Vessel 8″ Deep x 5.75″ Diameter
• Exterior 8.5″ H x 6.5″ W
• Viton Gasket
• KF-25 Connection Lines & Hardware
• 3mm Neoprene Insulator Cap
• Requires 800ml (~ 3.5 cups) of a transfer fluid such as ethanol. Not Included. Cascade recommends: ethanol, glycol, cryo-cool fluids
• Quality Made in USA
• 1 Year Warranty

COLDWELL Safety Tips:

At very cold temperatures solvents and even oxygen can re-condense back into liquid. This is potentially explosive. Liquid oxygen is a light blue color and can condense into a cold trap if a pump has sucked air through the trap when the trap is very cold. Always follow your standard operating procedures and safety guidelines.

COLDWELL Specifications

Material: 304 Stainless Steel
Connection: KF25 Inlet & Outlet
Capacity: 3 Quarts (2839 ml)

• Viton Gasket
• Neoprene Insulation Cap

*Monitor interior of stainless trap for clogging

Short KF25 tube – attach to vacuum pump

Tall KF25 tube – attach to vacuum oven

Weight: 14 lbs

COLDWELL Vacuum Cold Trap Differences:

The key to quality cold trap performance is: time, surface area, and temperature.

Time

Most cold traps have very narrow inlets and outlets, slowing down your process. Not Cascade’s COLDWELL vacuum cold trap! Full KF25 inlet and outlet connections never reduce flow.

Surface Area

 
Most cold traps have a glass or a smaller surface area to collect the matter your vacuum pump would otherwise ingest. Cascade’s COLDWELL surface area is a patent pending series of filter baffles sitting inside.

Unbreakable

 
Unlike most glass traps, Cascade’s COLDWELL is made of 304 stainless steel. If you drop it, the only thing that may break is your toe.