Zero Air Generator for FID 6.0 L/min, ZA FID AIR 6.0

SKU:
6920.25.060

    • Description

    Zero Air Generator for FID 6.0 L/min, ZA FID AIR 6.0

    The AirGen series ZA FID Air is able to remove the total hydrocarbons to less than 0.05 ppm from the external compressed Air. Very compact, the ZA FID Air can purify up to 30 L/min of compressed Air and can bear a pressure up to 7 bar (101 PSI).

    The filtration of the hydrocarbons is performed by using a catalytic oven filled with palladium. The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, considerably increasing detector sensitivity and ensuring precise analytical results.

    High efficiency coalescing pre-filtration and post filtration of particulate size greater than 0.01 microns are used to prevent any kind of particles from entering the analytical device. The ZA FID Air has a very simple and efficient interface. It can also can be managed by the HydroGen series HG PRO and HG BASIC and is ideal to supply Hydrocarbon free Air to FID detectors.

    Product features

    • Easy use and quickinstallation
    • High flow rate up to 30 L/min
    • Pressure up to 7 bar
    • RS 485 as standard
    • Purity: < 0.05 ppm THC
    • No maintenance
    • Reduced foot print
    • Stackable with HG BASIC and HG PRO

    Main applications

    • GC-FID
    • GC-NPD
    • GC-FPD
    • GC-PFPD
    • THA

    Technical specifications

     
    Models: ZA FID Air  1.5  3.0  6.0 15.0 30.0
    Zero Air outlet
    Flow rate (max) 1.5 l/min 3.0 l/min 6.0 l/m 15.0 l/min 30.0 l/min
    Outlet pressure (Max) 7 bar (101.5 psi)
    Total hydrocarbon content < 0.05ppm
    Air inlet
    Air Inlet requirement ISO 8573-1:2010 Class [2:4:1]
    Max inlet hydrocarbon content 100ppm
    Min supply pressure 3 bars (43psi)
    Max supply pressure 10 bars (145 psi)
    Temperature (min; Max) 1°C (34°F); 35°C (95°F)
    Communication
    RS485 Standard
    General data
    Supply voltage 100-240Vac (±10%) 47..63Hz
    Connection type IEC320-C14
    Nominal power (Max) 70 W (200 W) 140 W (240 W)
    Fuse rating (5x20mm) 4A (250VAC – T)
    Dimensions (W x D x H) 27 x 47 x 14 cm
    Net weight < 8 kg < 10 kg < 12 kg
    Connections
    Outlet port 1/8″ female BSPP
    Inlet port 1/8″ female BSPP
    Water purge Threaded ISO M5 female
    Operating conditions
    Temperature 5-35°C (41-95°F)
    Humidity (max, non condensing) 80% at 25°C (77°F)
    Noise < 35dB(A)
    IP rating IP20