Water, ACS Reagent Grade, ASTM Type I, ASTM Type II Packaged in glass containers, 4L

Water, ACS Reagent Grade, ASTM Type I, ASTM Type II

• For General Laboratory Requirements where microbial specifications are not a concern
• Tested to latest ACS, ASTM Requirements
• Meets ASTM Types I-IV Specifications
  • Type III Water, lowest laboratory grade water, recommended for glassware washing, heating baths and filling autoclaves or feed Type I lab water systems
  • Type II Water, general laboratory applications, preparation of reagents, filling incubators or test chambers
  • Type I Water, required for critical lab applications
• 18 megohm Water
• Packaged in Glass Bottles, where very low level of organics is needed

Schematic of Water System

Ricca’s closed loop continuous process water systems at each of our facilities include continual monitoring of TOC (Total Organic Carbon). In addition our systems use conventional water softening, prefiltration, activated carbon organic adsorption, reverse osmosis, mixed bed triple deionization, ultraviolet light irradiation and 0.2 micron membrane filtration. Our water systems have been validated to meet ACS/ASTM/USP/EP specifications.