CVO-10 PRO Package

Item No: CVO-10-ProPKG

CS-1901010011 

High production, large vacuum drying system for vacuum purging production quantities. Our largest 10 cubic foot vacuum oven complete with the Agilent IDP15 9 cfm oil-free scroll pump. The entire system is set on an industrial grade mobile rack for easy of mobility and to aid in keeping the lab clean.

Vacuum oven and pump are connected via our MAX EVAP connection kit – giving water, solvents, any outgassing material the largest exit path off the product and out of the oven. NRTL Certified, Made in USA.

Cascade’s Model CVO-10 offers incredible temperature stability for vacuum drying and purging of pharmaceuticals, botanicals, slurries – especially temperature sensitive material. This vacuum oven will liberate solvents, water or other unwanted compounds in large batch production environments.

Processing Temperature Sensitive Material? The CVO-10 comes in both low temp & high temp versions.

Be sure to get the low temp CVO-10 version that has excellent temperature uniformity for products such as pharmaceuticals, slurries or any product that can be damaged or destroyed by temperature fluctuations.

CVO-10 PRO Package – Low Temp

Low Temperature Processing Range: 26°F to 250°F (121°C)
Temperature Uniformity: +/- 1.5°F @ 105°F (40.5°C)
Temperature Stability: +/- 0.4°F @ 105°F(40.5°C)

SVAC 9.3 PRO Package – High Temp
High Temperature Processing Range: Up to 428°F / 220°C
Temperature Uniformity: +/- 6.5% of setpoint

CVO-10 PRO Package Includes

• Cascade Sciences CVO-10 Vacuum Oven
• Heavy-Duty Industrial Mobile Cart
• 9 Shelves
• MAX EVAP Connection Kit
• Agilent IDP15 Oil-Free Vacuum Pump, 9cfm

Note: this oven will not fit through a standard 36″ doorway.

Want High Production In Smaller Multiple Batches?

Our CVO-5 Double Up Package offers the same 10 cubic feet of processing space. Two each ovens share a powerful Agilent IDP15 oil-free vacuum pump with our MAXEVAP Connection Kit for the ability to work in multiple, smaller batches.

CVO-10 Vacuum Oven Features

• NRTL Certified by TUV
• 9 sliding, removable shelves that pull out and stay in place for easy load/unload
• Stable temperature control. Digital temperature readout with temp sensor INSIDE the oven
• Easy mobility as oven sits on heavy duty industrial cart. Pump sits underneath at base of cart.
• VITON door gasket
• Bright LED lights in window for visibility of sensitive material
• Digital vacuum gauge reads in inches of mercury or torr
• Smooth, quarter-turn vent valve
• Rear KF-25 port includes MAX EVAP Connection Kit for rapid vacuum drying or running feedthroughs inside oven for monitoring
• 220V / 1ph / 10AMPS
• Quality Tempered Rated Glass NGI-US to ANSI Z97.1.2007 156CFR/201 11 SGCC -2577 ½ UA
• Ergonomic. Turn vacuum pump on/off from oven control panel
• Fast Venting with larger ½” diameter vent line
• Rear vent barb allows for nitrogen or other inert gas connection
• Touch Panel LED control screen with user settable features

Agilent IDP15 Oil-Free Scroll Pump Features

• Quiet. Less noisy that diaphragm or oil-rotary vane pumps
• No Inlet / Exhaust Filters Required
• Hour Meter For Tracking Service Intervals
• 1 Year Warranty
• NRTL Certified /Made in USA
• Expert Rebuild/Maintenance Available from Cascade
• Maintenance is the replacement of a single interior tip seal. Order our IDP15 Tip Seal Replacement Kit or ask us about our maintenance service.
• Pull Deeper Vacuum / Better Vapor Tolerance With Gas Ballast Positions.The IDP15 has two gas ballast ports that assist the pump in handling condensing gases such as water vapor, or other gaseous products that become liquids or solvents when reaching atmospheric pressure.

Model CVO-10

All shelves are removable and adjustable.

Volume: 9.3 Cubic Ft. | 264 Liters
Oven Interior: (W x D x H) 28” x 24” x 24” | 711mm x 609mm x 609mm
Oven Exterior (not including rack): 44” W x 42” D x 40”H | 1118mm x 1067mm x 1016mm

Temperature Range

Low Temperature Processing Range: 26°F to 250°F (121°C)
Temperature Uniformity: +/- 1.5°F @ 105°F (40.5°C)
Temperature Stability: +/- 0.4°F @ 105°F(40.5°C)
Heat Up / Stabilization Time to 250°F: 120 minutes (to minimize overshoot)

High temp CVO-10 (CVAC 9.3)

to 428°F / 220°C available
Temperature Uniformity: +/- 6.5% of setpoint
Ambient laboratory conditions can affect temp performance

Vacuum Valve: Side Mounted Round
Vent Valve: ¼ Turn Lever | ½” diameter line
Interior Lighting: LED Strips (Rated to 150C) | On low temp CVO-10 only
Glass Window: Tempered NGI-US to ANSI Z97.1.2007
Vacuum Gauged: Reads in inches mercury or torr(Selectable)

Temperature Controller

Touch Screen
Accurate Within 1°F
Independent Overtemp Failsafe

Ports (Rear)

Vacuum: KF-25 Port
Vent: 1/2” Barb
Data: Log temp & vacuum levels

Inert Gas Introduction

Yes. Via 3/8” Vent Barb
15 psi max inlet pressure

Power Option

220V – 240V / 1ph / 10A 50/60Hz | Cord Included
NEMA 6-15R Power Outlet
BTU Rating at 250ºF: 6980 BTUs/hr at full capacity

Shelves

Removable
9 Each Included
Slide on rails, extend, stay in place
Approx 930 cubic inches of volume

Vacuum Pump: Agilent IDP15 Specs

Oil-Free, Scroll
9 CFM
10 x 10^-3 Torr

Quick Specs

120V / 1ph (220V available)
Intake Connection: KF-25
Dimensions (L x W x H): 19.08” x 9.22” x 14.3”
Weight: 75 lbs