Pyrex round media storage bottles and reusable screw caps, 250mL

SKU:
CLS1395250-10EA
  • $141.00

    • Description

    Pyrex round media storage bottles and reusable screw caps, 250mL

    Synonym(s):
    Pyrex media bottles, bottle, glass media bottles, laboratory bottles, media bottle, pyrex bottle, round bottles
    NACRES:
    NB.43

    PROPERTIES

    material

    borosilicate glass bottle
    clear bottle
    cylindrical bottle
    orange polypropylene cap (plug seal)

    sterility

    non-sterile

    feature

    autoclavable
    cap
    graduations
    reusable

    packaging

    case of 10

    manufacturer/tradename

    Corning 1395-250

    availability

    not available in EU

    capacity

    250 mL

    diam. × H

    70 mm × 138 mm

    fitting

    GL 45 neck thread

    DESCRIPTION

    General description

    These heavy duty 250 mL PYREX round bottles can be used for storage as well as mixing and sampling. They include a linerless, one-piece autoclavable orange polypropylene plug seal GL45 threaded cap with a drip-free pouring ring. New glass bead indicates full capacity line. Bottles have permanent white enamel graduations and marking spots.

    Caution: DO NOT tighten caps immediately after autoclaving as the vacuum resulting from cooling can cause breakage. -A wide range of optional caps are available for these bottles: -Polypropylene colored caps in a choice of orange, green, purple, red, and light gray for ease of sorting and identification. -Vented membrane cap with 0.22 μm PTFE hydrophobic membrane. -Red PBT (polybutylene terephthalate) solid caps and ETFE pouring rings for dry heat sterilization (180°C). -PBT caps with silicone septa for syringe sampling or introduction of reagents.
    Pyrex heavy-duty round media storage bottles can be used for storage as well as for mixing and sampling. These media storage bottles Include linerless, one-piece, autoclavable, orange PP plug-seal caps with drip-free pouring rings. Optional red PBTP caps and red ETFE pouring rings are available separately, for dry heat sterilization (180°C).

    Pyrex round media storage bottles are made of borosilicate glass with permanent, white enamel graduations and marking spots.

    Caution: Bottles larger than 2 L should NOT be used with bottle-top filter units or in other applications involving vacuum/pressure, as breakage may occur. DO NOT tighten caps immediately after autoclaving as the vacuum resulting from cooling can cause breakage.

    A wide range of optional caps are available for these bottles:
    • Vented membrane cap with 0.22 μm PTFE hydrophobic membrane
    • Red PBT (polybutylene terephthalate) solid caps and ETFE pouring rings for dry heat sterilization (180°C)
    • PBT caps with silicone septa for syringe sampling or introduction of reagents

    Legal Information

    PYREX is a registered trademark of Corning, Inc.