The compact Minichillers are an economic and environmentally friendly cooling solution for many laboratory applications. A calculation of water and waste water costs shows that a Minichiller can save up to 48,000 litres of water in a working week and due to its low procurement price, return on investment is achieved within a very short time. The units have small footprints, only requiring 225 x 360 mm on the laboratory bench and are therefore suitable for cooling reactor blocks, vacuum pumps, rotary evaporators or heat exchangers. Minichillers allow stable application conditions due to constant values for temperature, pressure and throughflow quantities. They are also perfect for continuous operation at ambient temperatures up to 40°C. Despite the economic purchase price the coolers are well equipped and have a large temperature indicator, fill level indicator, as well as status LEDs for the pump, cooling and heating. A 1 kW heater is optionally available with which the temperature range can be extended to +100°C. Minichillers are available as both air and water cooled models and use natural refrigerants.
The new OLÉ controller combines state-of-the-art technology with simple operation. OLÉ models are suitable for routine tasks in research and industry and are convincing as practice oriented basic equipment. Option: Pt100 sensor connection #10519 to display (not control) e.g. of the process temperature (only available factory fitted, additional charge).
Reliable continuously operation with warning functions
Easy to fill and empty
Illuminated filling level indicator
Bright, large OLED display
USB and RS232 interfaces
Natural refrigerant
General information & temperature controller
Temperature range
-20...100 °C
Temperature stability
±0.2 °C
Temperature display
OLED Display
Display resolution
0.1 °C
Alarm message
optical, acoustical
Controller
OLÉ
Safety class
III / FL
Protection class
IP20
Dimensions (W x D x H)
280 x 490 x 424 mm | 11.02 x 19.29 x 16.69 inches
Weight
36 kg | 79.38 pounds
Heating / cooling capacity
Heating capacity
1,6 - 2,1 kW
Cooling capacity
15
0
-10
-20
°C
0,6
0,5
0,35
0,15
kW
Cooling machine
air-cooled
Refrigerant (ASHRAE, GHS)
R290 (A3, H220) (0,085 kg)
Circulation pump
Pressure pump max.
24 lpm ; 0.7 bar | 6.34 gpm ; 10.15 psi
Suction pump max.
18 lpm ; 0.4 bar | 4.76 gpm ; 5.8 psi
Pump connection
M16x1 AG male
Connections
Digital interface
USB (Device), RS232 Interface
Operating data
Permissible ambient temp.
5...40 °C
Noise level
56 dB(A)
Filling volume min.
2.8 Liters | 0.74 gal
Volume of expansion
2.2 Liters | 0.58 gal
Power supply
208-240V 1~/2~ 50/60Hz
Current max.
12 A
Fusing
16 A
Miscellaneous
Please take further technical information as well as information about the scope of delivery, accessories and peripheral devices from the PDF data sheet. In cases of doubt the details given in there apply. If nothing to the contrary is quoted then the performance data referred is at an ambient temperature of 20°C.
Please observe the notes on installation and/or the space requirements of our products.
The following voltage and frequency tolerances apply based on EN60034-1: Voltage +/- 5% for a frequency tolerance at the same time of +/- 2%
Examples to illustrate this: Not permissible, for example. is -5% on the voltage and +2% on the frequency. Permissible, on the other hand, are tolerances of -5% on the voltage and -2% on the frequency.
This equipment is compliant to US-SNAP and all applicable EU laws. The US-SNAP end-use for this equipment is the industrial process refrigeration. Certification by a Notified Body upon request.
We reserve the right to make technical changes and correct errors. Illustrations can deviate from the original.
Huber CS 50-H
Chiller with air-cooled refrigerating unit and circulation pump (stainless steel). Housing, atmospheric open tank and copper soldered evaporator made of stainless steel. With digital...
Cooling System Minichiller MT /115 V Compact chiller with air-cooled refrigeration and circulation pump Made exclusively for Mettler Toledo Thermal Analysis Systems: 30319250, 30319252, 30421562,...
Huber CS 35
Performance Characteristics
The CS chillers expand the Huber product range with compact and highly affordable recirculating coolers. The Huber CS chillers combine cool and smart...
Unistat 915w
Dynamic temperature control system / circulation thermostat
Performance Characteristics
The Unistat range inspires with unique thermodynamic properties and a range of functions to meet...
Huber CS 100
Performance Characteristics
The CS chillers expand the Huber product range with compact and highly affordable recirculating coolers. The Huber CS chillers combine cool and smart...
Unistat 815
Dynamic temperature control system / circulation thermostat
Performance Characteristics
The Unistat range inspires with unique thermodynamic properties and a range of functions to meet...
Huber LCS 80
Chiller with air-cooled refrigerating unit and circulation pump (stainless steel). Housing, atmospheric open tank and copper soldered evaporator made of stainless steel. With digital...
Huber KISS K6
Cooling bath thermostats with insulated cooling baths are an economic solution for thermoregulation of objects directly in the thermostat bath. The units are therefore...
CC-308B
Heating bath circulation thermostat
Performance Characteristics
Heating bath circulation thermostats with a stainless steel bath allow the temperature control of internal and external...