Huber KISS K6

SKU:
2008.0045.98
  • $6,570.00
  • Description

    Huber KISS K6 

    Cooling bath thermostats with insulated cooling baths are an economic solution for thermoregulation of objects directly in the thermostat bath. The units are therefore suitable for a number of typical heating and cooling tasks such as sample temperature control, materials testing, quality control, analyses, etc. Cooling circulator operates with natural refrigerants and are therefore offer an environmentally friendly solution to temperature control. In addition, cooling circulators are fitted with automatic refrigeration capacity adjustment, reducing energy consumption and waste heat down to the absolute essential. With low level protection and adjustable over heating protection the units fulfil the requirements of Safety Class III/FL according to DIN 12876. The thermostats can also be used for externally attached applications using the pump connections at the rear.
     The new KISS controller combines state-of-the-art technology with simple operation and stylish design. KISS models are suitable for routine tasks in research and industry and are convincing as practice oriented basic equipment. Option: Pt100 sensor connection #10519 to display (not control) e.g. of the process temperature (only available factory fitted, additional charge).
    KISS temperature controller
    Bright, large OLED display
    Simple operation with menu navigation
    Simultaneous display of setpoint, Tmin, Tmax and actual temperature
    Status displays for pump, cooling and heating
    Overtemperature and low level protection
    Safety class III/FL (DIN 12876)
    USB and RS232 interfaces
    Autostart function for power failure
    3 colour versions available: grey (standard), blue, red
    Natural refrigerant

     
    General information & temperature controller 
    Temperature range  -25...200 °C
    Temperature stability ±0.05 °C
    Temperature display  OLED Display
    Alarm message  optical, acoustical
    Controller KISS 
    Safety class  III / FL
    Protection class  IP20
    Dimensions (W x D x H) 210 x 400 x 546 mm | 8.27 x 15.75 x 21.5 inches
    Weight 25 kg | 55.12 pounds
    Heating / cooling capacity 
    Heating capacity  1,5 kW
    Cooling capacity
    20 0 -10 -20  °C
    0,2 0,15 0,1 0,05  kW
    Cooling machine air-cooled
    Refrigerant (ASHRAE, GHS) R290 (A3, H220) (0,047 kg)
    Circulation pump  
    Pressure pump max.  14 lpm ; 0.25 bar | 3.7 gpm ; 3.62 psi
    Suction pump max.  10.5 lpm ; 0.17 bar | 2.77 gpm ; 2.47 psi
    Pump connection  M16x1 AG male
    Connections 
    Digital interface  USB (Device), RS232 Interface
    Operating data
    Permissible ambient temp. 5...40 °C
    Bath opening W x D / BD 140 x 120 / 150 mm | 5.51 x 4.72 / 5.91 inches
    Bath volume  4.5 Liters | 1.19 gal
    Filling volume min.  2 Liters | 0.53 gal
    Power supply 110-120V 1~ 50/60Hz
    Current max. 15 + 3,2 A
    Miscellaneous
    Please take further technical information as well as information about the scope of delivery, accessories and peripheral devices from the PDF data sheet. In cases of doubt the details given in there apply. If nothing to the contrary is quoted then the performance data referred is at an ambient temperature of 20°C.

    Please observe the notes on installation and/or the space requirements of our products.

    The following voltage and frequency tolerances apply based on EN60034-1:
    Voltage +/- 5% for a frequency tolerance at the same time of +/- 2%

    Examples to illustrate this: Not permissible, for example. is -5% on the voltage and +2% on the frequency. Permissible, on the other hand, are tolerances of -5% on the voltage and -2% on the frequency.

    This equipment is compliant to US-SNAP and all applicable EU laws. The US-SNAP end-use for this equipment is the industrial process refrigeration. Certification by a Notified Body upon request.

    We reserve the right to make technical changes and correct errors. Illustrations can deviate from the original.