Handheld Probe for Measuring Bulk Packaged Materials, 10mm diameter, length 280mm

SKU:
HC2-HP28
  • $1,509.00

    • Description

    Handheld Probe for Measuring Bulk Packaged Materials

    The insertion probe is suitable for measurement in bulk materials, bricks, concrete, etc. It measures humidity and temperature and calculates the dew/frost point.

    Applications
    10 mm insertion probe: measurements in dusty bulk materials such as flour, sugar, etc.

    Features
    • Range of application: -40…85 °C / 0…100 %rh
    • Digital interface (UART) and scalable analog outputs, 0…1 V
    • Standard output scaling: 0…1 V = -40…60 °C / 0…100 %rh
    • Adjusted at 23 °C and 10, 35, 80 %rh

    Probe type Insertion probe
    Humidity sensor Hygromer IN-1
    Temperature sensor PT100 1/3 DIN Class B
    Long-term stability <1 %rh / year
    Accuracy w. adjustment profile "standard"   at 23 °C / 10, 35, 80 %rh ± 0.8 %rh / ± 0.1 K
    Accuracy at 23 ±5 °C ± 0.008 aw / 0.8 %rh / ±0.1 K
    Reproducibility Airchip <0.02 %rh / 0.01 K
    Response time t 63 <20 s, with filter
    Dimensions 280 mm / 500 mm
    Operating range -40…85 °C / 0…100 %rh
    Allowed wind speed 40 m/s, with filter
    Exploitation software ROTRONIC HW4
    Psychrometric calculations Dew or frost point
    Analogue outputs scaleable by the user Yes
    Software Update With internet and HW4 software
    User information from Software HW4 (devicemanager)
    Data processing via HW4 with interface cables
    Type of output signals 2 x 0…1 VDC
    Digital output signal (standard) UART
    Service Interface UART
    IP protection rating IP50
    FDA/GAMP compatibility FDA 21 CFR Part 11 and GAMP compatible
    Measurement interval 1 s
    Probe adjustment by software 1 Point & multipoint %rh & °C
    Device Protection by password Yes
    Analog output signal (standard) 0…1 V = 0…100 %rh; 0…1 V = -40…60 °C
    Reverse voltage protection Mechanically in the connector
    Max. cable length Up to 5 m with passive cable. Up to 100 m with active cable.
    Probe material Stainless steel 1.4305 (V2A)
    Enclosure material POM
    Weight 200 g
    Start-up time 1,5 s
    CE / EMC conform 2007 / 108 / EG
    FDA / GAMP FDA 21 CFR part 11 / GAMP5
    Material Stainless steel DIN 1.4305 (probe), POM (handle)
    Power supply 3.2….5 VDC, calibrated at 3.3 VDC, current: ~4.5 mA
    Temperature dependence 0.001 K/K, 0.0002 aw/K
    For use with HygroLab C1, HP23-AW-A
    Filter type Sintered steel with 5 μm pore size