CDO-28 Dry & Decarb Oven, Stainless Exterior

SKU:
CDO-28-SS-CS
  • CDO-28 Dry & Decarb Oven, Stainless Exterior
  • CDO-28 Dry & Decarb Oven, Stainless Exterior
  • CDO-28 Dry & Decarb Oven, Stainless Exterior
  • CDO-28 Dry & Decarb Oven, Stainless Exterior
  • CDO-28 Dry & Decarb Oven, Stainless Exterior
  • CDO-28 Dry & Decarb Oven, Stainless Exterior
  • CDO-28 Dry & Decarb Oven, Stainless Exterior
  • CDO-28 Dry & Decarb Oven, Stainless Exterior
  • CDO-28 Dry & Decarb Oven, Stainless Exterior
  • CDO-28 Dry & Decarb Oven, Stainless Exterior
  • Description

    CDO-28 Dry & Decarb Oven, Stainless Exterior

    Item No: CDO-28-SS-CS

    SPECS

    MANUAL

    CAD DRAWING

    Cascade’s CDO-28-SS-CS is purpose-built for large-scale, industrial drying and decarboxylation of material with additional features:

    • 28 cubic foot interior
    • Stainless exterior for GMP, cleanliness standards
    • Built-in Humidity Sensor assists in dryness targets
    • 6 each, stay-in-place, sliding extension shelves (also stainless steel)
    • 6 each FDA & temperature rated fine micron mesh bags for ground material – Use of mesh bags are required to prevent oven contamination, material loss and best safety practices.
    • NRTL Certification

    The oven features horizontal airflow that enables more consistent, uniform temperatures across the shelf space. Proudly made in USA.

    Ideal Uses:
    • Industrial scale forced-air convection drying below 149ºC / 300ºF
    • Decarboxylation processes
    • Drying organic material. Drier material will yield better results than processing wet material. Removing as much moisture as possible pre-processing will save time in the post process of vacuum purge and winterization.
    • Lab glassware dryer
    Model CDO-28-SS-CS Features
    • Horizontal Airflow. The airflow moves uniformity across the shelf space from right to left
    • Digital set-point control, timer and overtemp failsafe protection
    • Humidity sensor displays relative humidity levels during process
    • Includes 6 sliding, extend and stay in place shelves for ease of loading. Stainless Steel.
    • Includes 6 temp-rated, fine micron mesh bags for easy loading & uniform drying of messy powders, ground up or turbulent materials
    • Fast heat-up: 24 Minutes to 149ºC (300°F) / Uniformity: +/- 2ºC (3.5°F)
    • Stainless steel interior & exterior / Food lab grade construction. 301 SST Shelves
    • Triple wall construction meets CE, UL and TUV requirements to keep work-spaces cool.
    • Quality Made in Oregon USA
    • 1 Year Warranty

    The Cascade Difference

    Basic forced-air lab ovens are mass-produced and sold by many large scale laboratory equipment distributors. But there are key differences between Cascade and other less costly, often imported lab ovens:

    Independent Overtemp Failsafe Protection

    The Cascade Sciences CDO-28 is equipped with a heating cutoff system that will automatically stop power to the heaters when the overtemp setting is tripped. This protection system will provide peace of mind for overnight or unattended drying processing.

    NRTL Certification. No Extra cost.

    The CDO-28 Oven comes certified by the Nationally Recognized Test Lab, TUV. This certification is a requirement by many municipalities.

    • CAN/CSA-C22.2 No. 61010-1:2012
    • +UPD No. 1:2015-07 + UPD No. 2:2016-04
    • CAN/CSA-C22.2 No. 61010-2-010:2015
    • UL 61010-1:2012-05
    • UL 61010-2-010:2015
    • EN 61010-1:2010
    • EN 61010-2-010:2014
    Rigorous Quality Assurance in an ISO Certified, USA Manufacturing Facility

    Cascade Sciences manufactures our ovens in Oregon, USA. We are proud of our ISO 9001 Certification/Accreditation. Each oven completes a series of quality assurance procedures before shipment:

    • Electrical & mechanical safety is thoroughly tested in compliance with TUV requirements
    • Functional testing verifies user settable items consistent with most lab protocols/usage models
    • Temperature verification includes calibration & temp chamber uniformity following ASTM standards
    • Units are cleaned and packed in ISTA tested, certified packaging materials

    Item No: CDO-28-SS-CS

    All shelves are removable and adjustable.

    Capacity

    Volume: 28 Cubic Ft. (793 Cubic Liters)
    Interior: 31.5″W x 60.5″H x 26″D (800mm x 1,537mm x 661mm)
    Exterior: 43”W x 85.5”H x 34.3”D (1,092mm x 2,171mm x 871mm)

    Temperature

    Temperature Range: 2.2ºC (36°F) above room temp to 148ºC (300°F)
    Temp Stability: +/- 2ºC (+/-3.5°F)
    Temp Recovery @ 240°F *Load Dependent*
    Door Open 30 Seconds: 3 min to stabilize
    Door Open 60 Seconds: 5 min to stabilize

    Power Options 230V – 240V / 1ph / 26AMP |
    Oven Must Be Hardwired By Electrician | Oven will also run on 208V

    BTUs Per Hour at Max Power: 18,425 BTUs

    Linear Shelf Space Airflow: 17.1 cubic ft per min
    Air Intake Adjustable. Top 2.75” Diameter
    Air Exhaust Adjustable. Top 2.75” Diameter
    Shelving Comes with 6 each. Height adjustable. | Fits up to 16 shelves – buy more here
    Surface Area: 31”W x 23”D (787mm x 584mm)
    Weight Capacity: 75 lbs (34 kg)

    Mesh Bags

    Comes with 6 Temp Rated Mesh Bags | Fits up to 10 mesh bags – buy more here
    Dimensions: 27.5″W x 21.5″D (699mm x 546mm)

    Polypropylene (PP)
    Melt Temperature: 161°C (363°F)
    Softening Point: 152°C (305°F)
    Heat Deflection Temperature: 90°C (194°F)
    Glass Transiton Temperature: 0°C (32°F)

    * Mesh bags are REQUIRED to prevent oven contamination and ground material loss.
    * Polypropylene products produced for some filtration applications are made from resin that complies with FDA regulations for food contact. The regulation compliance is product number dependent / specific.
    * Impact at cold temperatures is likely to cause strand cracking or breakage

    Weight

    Product Weight: 565 lbs (256 kg)
    Shipping Weight: 640 lbs (290 kg)

    Certifications

    ISO 9001
    NRTL TUV #U8 170464972 077
    CAN/CSA-C22.2 No. 61010-1:2012
    + UPD No. 1:2015-07 + UPD No. 2:2016-04
    CAN/CSA-C22.2 No. 61010-2-010:2015
    UL 61010-1:2012/R:2016-04
    UL 61010-2-010:2015
    EN 61010-1:2010
    EN 61010-2-010:2014

    Warranty: 1 Year