Description
Alchemist Rotary Evaporator, 20L
Description
The Alchemist production rotary evaporator is used whenever benchtop system capacity is no longer sufficient. Featuring a large capacity 20L evaporation flask and capable of evaporating 4L/h water and 11L/h of ethanol. The in-process product feed and waste discharge valve system allow for continuous distillation. Our PID controller enables accurate process control and is extremely easy to use. The bath temperature of up to 180°C covers all common solvents and even allows for in-evaporator decarboxylation if required.
Safety:
- ETL and CE rated
- Safety coated glassware to protect users in case of glass breakage
- Temperature overheat protection at 220 °C
- Run-dry protection, automatically powers off if operating without any water/oil in the heating bath
- Automatic motor lift releases the evaporating flask to a safe position in case of power failure
Features & Benefits:
- Continuous evaporation possible thanks to in-process feed and drain setup
- Large LCD with bath temperature, rotation speed, rotation direction and time
- One-click automatic motor lift
- Water/oil heating bath with wide temperature range from ambient to 180 °C
- Flask speed range from 10 to 150 rpm with interval operation and rotation direction select
- Double-layer high-efficiency condenser with large condensation area for high evaporation performance and solvent recovery rates
- Patented PTFE double sealing vapor tube seal with excellent performance
Technical details
Alchemist 20L | |
HGS SKU Number | 10206001 |
Power Specification | 220V 50/60Hz 1ph – 4600W |
Evaporation Performance | Water 4.0 L/h (max) |
Size | 20 L |
Temperature Range | ambient to 180 °C ( water and oil mode) |
Temperature Control Accuracy | Water: ± 1 °C Oil: ± 3 °C |
Rotation Speed | 10 – 150 rpm |
Ultimate Vacuum | < 2.6 mbar |
Temperature Control Method | Microprocessor PID Control |
Display | LCD temperature / flask rotation speed / flask rotation direction / time |
Safety Features | Motor Overcurrent Protection, Residual Current Device, Lifting Overload Protection, Boil-dry Protection, Over-Temperature Protection |
Sample Flask | Round flask 20L |
Receiving Flask | Round Flask 10L with Drain Valve |
Condenser | Two-Section Vertical Triple Serpentine Condenser, Cooling Surface 1.2m2 |
Heating Bath Size | φ 450×240mm |
Connectors | Cooling /Suction Nozzle Outer Diameter 16mm, Vacuum Pump nozzle outer diameter 16mm |
Dimension [D×W×H] | 1160mm×600mm×1860mm |