Ai SuperVac 21 Cfm Corrosion-Resist 2-Stage Pump UL/CE

SKU:
SV21C-UL
  • Description

    Ai SuperVac 21 Cfm Corrosion-Resist 2-Stage Pump UL/CE

    * UL certification NOT available for the 230V model

    The newcorrosion resistant Ai SuperVac 21 cfm commercial grade vacuum pumps are now UL certified (115V model), this certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan. These pumps are designed for reliable long time continuous operation, they will take your equipment's vacuum down to 0.3 micron in minutes. Comes standard with all necessary fittings and a high capacity exhaust oil mist filter which also returns trapped pump oil back to the pump and makes the pump quieter to run.

    Multi-level gas ballast is designed to allow purposefully pull a less deep and slower vacuum by opening the gas ballast, allowing dry air to go directly into the pump and diluting the vacuum pull, and it also helps keep moisture, solvent, and other contaminants from getting stuck in the pump, and instead passing through to the exhaust.

    It is important to note that pumps should always be ran in a well ventilated area.

    Features

    • UL certified (115V model)
    • Corrosion-resistant design for durable operation in various environment
    • Adjustable gas ballast
    • Built-in oil back-flow prevention check valve
    • Internal forced oil cycling system
    • Integrated cylinder structure
    • Exhaust filter with easy-to-change replaceable filter element
    • Heavy duty structure and designed for reliable long time operation
    • Low noise
    • All necessary fittings and filter included for immediate use
    • 2-year warranty

     

     Electrical requirements

    115V 60Hz or 230V 50/60Hz single phase,

    1100 watts

     Pumping rate  21 cfm
     Ultimate vacuum without gas ballast  0.3 micron/millitorr
     Ultimate vacuum with gas ballast  6 micron/millitorr
     Inlet/outlet connection  KF25/NW25 flange
     Oil volume  2 liter / 2.1 quart
     Motor rate  1715 rpm
     Working temperature  5 to 40°C
     Unit/shipping dimensions (LxWxH)  21x7.5x12" / 37x10x17"
     Unit/shipping weight  80 Lb / 98 Lb
     Recommended oil  Ultra-grade 19
     Noise level  < 58 dB
     Warranty  Two years
     Compliance  UL (E500328), CE