Ai Glass Thin Film Turnkey With Installation And Training

SKU:
TG-3

    • Description

    Ai 3” Glass Thin Film Turnkey With Installation And Training

    Evaporator configuration roller or wiper

    PRICING INCLUDES ON-SITE INSTALLATION WITHIN CONTIGUOUS US.

    Ai GLASS THIN FILM DISTILLATION SYSTEM FEATURES

    • High precision PTFE rollers (or blades) and inner glass surface allow a complete and uniform thin film on the heated surface, and prevent process residue
    • Pre-installed cooling/heating tubing with fluid direction labels and M16 ports
    • Low-placed feeding flask for ease of operation
    • Driving motor with magnetic coupling sealing ensures a high vacuum level
    • Constructed with high borosilicate glass 3.3, stainless steel, and Viton gaskets for ultimate corrosion resistance
    • A transparent glass system allows you to see through all processes
    • Heavy-duty stainless steel frame
    • Installation included in the price within contiguous 48 US states
    • Cold Traps are only suitable for use with dry ice or a cold finger chiller such as an IP-80 or TC100/TC100E. Always wear proper PPE when handling dry ice.

    CAUTION!

    • Never fill circulated heaters or chillers with water, always use Ai or manufacturer's recommended fluid
    • Always leave ample fluid space in heater reservoir to allow fluid heat expansion
    • Always keep system vacuum passage or drain valve open when heating up circulation jackets
    • Always make sure your vacuum pumps and diffusion pump fluid is clean and within limits
    Model  TG-3
    Power Heating Tape Controller: 220V 60Hz 1-phase
    Stirrer: 220V 60 Hz 1-phase
    PCG-750 Vacuum Gauge: 110V 60Hz 1-phase
    Throughput 500ml per hour average (based on processes and material fed)
    Condenser Surface Area: 500 cm^2
    Condenser Type: Coil
    Material: 3.3 Borosilicate Glass
    Volume: Approx. 500mL
    Operating Temperature: -25°C to 200°C
    Evaporator Surface Area: 600 cm^2
    Material: 3.3 Borosilicate Glass
    Volume: Approx 2L
    Operating Temperature: 25°C to 200°C
    Wiper System Style: Spring-tensioned Multi Segmented
    Material: PTFE
    Driving Motor: Adjustable Speed Overhead Motor
    Stirrer Coupling Type: Magnetic Drive
    Cold Trap Material: 3.3 Borosilicate Glass
    Depth:12”
    Quantity: One
    Receiving Flask Volume: 500mL
    Recommended Coolant: Dry ice or immersion chiller (immersion chiller not included in the turnkey package)
    Feeding System Flask: Glass, 1.5L Jacketed
    Flask Jacket: Approximately 1L
    Feeding System: Manual Valve
    Sealing Gaskets Food Grade Viton
    Vacuum System Vacuum Gauge: PCG-750 with LCD display for high vacuum application
    Vacuum Pump: SuperVac 11 with oil mist filter
    Temperature Control Units Evaporator and Feed Flask: Kiss 205b
    Internal Condenser: Kiss K6
    Unit dimensions & weight 42x18x 62” (LxWxH) and 100 lbs

     

     

    TG-3 Thin Film Turnkey Standard package

    Part description

    Part image
    500mL cold trap receiving flask, glass

    2L receiving flask, glass (For TG-3 only)

    Set of Stainless-Steel Flexible Hoses (2x 40 inch, 1x 24 inch)


    Flask Securing Clamps


    Insulated Silicone Tubing (minimum of 6 ft)


    6x6” Stainless Steel Scissor Jacks


    2L Cork Ring


    2x 24/40 Lid Caps and 1x Feed Flask Inlet with Valve

     
    Feed Flask with 1x Clamp, 1x 3 port 24/40 Lid, and 2x Gaskets, 2x Valves, and 2x Fittings

     
    Feed Flask Supporting Clamp with Bosshead and screws


    220V Temperature Controller


    Heat Tape with Thermocouple


    220V Overhead Stirrer


    Spare O—Ring Set

    Thin Film Pump and Vacuum Gauge and manifold, with Bleed valve, adapter, and 2x KF16 clamps and centering rings


    Glass to SST Flexible Hose Adapter and gaskets (may come preinstalled on feed flask and thin film)


    12 mm Yor Lok to M16 Huber Unit Connector and 12 mm Yor-Lok to Hose Adapters


    KF25 bellow, clamps, and centering rings

    3x Allen Keys and 2 sets of Allen screws (6 pcs ea., and 1 set of hose clamps (6 pcs)

     
    TG-3 glass Thin Film evaporator, lid, and skid


    User's manual

    CHILLER/HEATER
    HUBER KISS 205B 200C 5L 14L/min, 2kW heater, 230V 60Hz

    HUBER KISS K6 -25C to 200C 4.5L 14L/min, 2kW heater, 230V 60Hz

     
    VACUUM PUMP
    Ai SuperVac 11.3 Cfm Corrosion-Resist 2-Stage Pump

    DURATHERM S -66C to 366C thermo transfer fluid 5-gallon (18.9L)

    Antifreeze 1-gallon (3.78L) 50-50 mix ethylene glycol and water

    Agilent PCG-750 Pirani Capacitance diaphragm high vacuum gauge with power

    24V Power Supply for Agilent PCG-750 Gauge AGPS45INT