Ai 40L Recirculating Chiller With 30L/Min Centrifugal Pump

SKU:
C30-40-50L

    • Description

    Ai -30°C 40L Recirculating Chiller With 30L/Min Centrifugal Pump

    Ai C30-40 series recirculating chillers are the true thermostatic control laboratory chiller, these closed laboratory chillers are ideal for applications such as cooling rotary evaporators, analytical instrumentation, laser etching, ICP, vacuum systems, plasma etching and jacketed reactors. This system can also be used as a replacement to tap water cooling in laboratory applications.

    Ai C30-40 are compressor-based recirculating chillers that offer outstanding performance and high reliability as well as quiet operation and ease-of-use. Powerful force/suction pump provides constant flow rates, while microprocessor PID controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature.

    IMPORTANT! -30C/-22F ULTIMATE TEMPERATURES ARE TESTED UNDER EMPTY LOAD CONDITION (NO ROTARY EVAPORATORS OR JACKETED REACTORS ATTACHED).

    C30-40 circulating chiller features

    • ETL tested to UL and CSA standards
    • No dry ice or liquid nitrogen needed
    • Advanced PID digital temp controller
    • Built-in chilling fluid filter protects the recirculating pump and prevent blockage
    • All steel construction for durability
    • Eco-friendly R404A refrigerant
    • Cost saving as the water consumption is completely eliminated
    • Built-in casters for mobility
    • Insulated tubing included
    • Recommended for 50L rotary evaporators

     

     Model  C30-40-50L
     Temperature range  Ambient to -30°C (No load)
     Electrical requirements  220V 60Hz 1-PH 18A, 3,960 watts (Not compatible with 50Hz power)
     Cooling capacity
     (Assuming working environment
    25°C/77°F)    		  @ 32°F/0°C: 5,000W
     @ 14°F/-10°C: 3,000W
     @-4°F/-20°C: 1,800W
     @-22°F/-30°C: 1,000W
     Compressor  Make: KK
     Power: 208-230V 60Hz 1-PH
     Number of compressor: one
     Refrigerant: R404A (3.2 kgs)
     Recirculating pump  Model: 25PLBR30-10
     Type: Centrifugal
     Output: 280 watts
     Pumping speed: 30 L/min or 8 gallon/min
     Maximum pressure: 1 bar
     Coolant outlet pressure  Displayed on the built-in mechanical pressure gauge
     Reservoir  Material: Type 304 stainless steel, polished
     Chilling fluid connection: 3/4" NPT
     Drain port: 1/2" NPT
     Overflow port: 3/8" hose barb
     Capacity: 40 liters or 10.6 gallons
     Dimensions: 17.5 x 17.5 x 9.5" (WxDxH)
     Radiator  Fan motor
    Make: Boyoung
    Model: YWF4E-400
    Power: 220V 60Hz 1.3A 300W
    Rotation speed: 1550 rpm
    Flow rate: 4240 m3/hour
     Cleaning
    Clean radiator fins with a fin comb every three months
     Temperature controller

     Type: Digital microprocessor PID controlled
     Display unit: Celsius °C
     Temperature accuracy: +/- 2°C
     Temperature range: Ambient to -30°C
     Temperature sensor type

     Pt100
     Housing  Powder coated type 42 stainless steel
     Recommended coolant  For 50°F/10°C or higher:
    distilled water
     Between 50°F/10°C and -22°F/-30°C:
    50% ethylene glycol + 50% distilled water
     Working environment  -15°C/5°F to 25°C/77°F, at <66% humidity
     Built-in swivel casters  Four
     Unit/shipping dimensions   40 x 25 x 41" / 46 x 30 x 51" (WxDxH)
     Unit/shipping weight  365 Lbs / 480 Lbs
     Safety  Compressor over-temp protection
     Compressor delay start protection
     Short circuit and ground protection
     Over-current protection
     Over-voltage protection
     Recommended for rotary evaporators  Ai 50L SolventVap rotary evaporators
     Warranty  One year
     Compliance  UL 61010-1 :2012 Ed.3+R:29Apr2016
     CSA C22.2#61010-1 :2012 Ed.3