Ai 30L Recirculating Chiller With 20L/Min Centrifugal Pump (EL Tested to UL/CSA Standards)

SKU:
C30-30-20L

    • Description

    Ai -30°C 30L Recirculating Chiller With 20L/Min Centrifugal Pump (EL Tested to UL/CSA Standards)

    Ai C30 series recirculating chillers are the true thermostatic control laboratory chiller, these closed laboratory chillers are ideal for applications such as cooling rotary evaporators, analytical instrumentation, laser etching, ICP, vacuum systems, plasma etching and jacketed reactors. This system can also be used as a replacement to tap water cooling in laboratory applications.

    Ai C30 are compressor-based recirculating chillers that offer outstanding performance and high reliability as well as quiet operation and ease-of-use. Powerful force/suction pump provides constant flow rates, while microprocessor PID controller gives you the ideal solution when you need precise temperature control or cooling below ambient temperature.

    IMPORTANT! -30C/-22F ULTIMATE TEMPERATURES ARE TESTED UNDER EMPTY LOAD CONDITION (NO ROTARY EVAPORATORS OR JACKETED REACTORS ATTACHED).

    C30 circulating chiller features

    • ETL tested to UL and CSA standards
    • No dry ice or liquid nitrogen needed
    • Advanced PID digital temp controller
    • Built-in chilling fluid filter protects the recirculating pump and prevent blockage
    • All steel construction for durability
    • Eco-friendly R410A refrigerant
    • Cost saving as the water consumption is completely eliminated
    • Built-in casters for mobility
    • Insulated tubing included
    • Recommended for 20L rotary evaporators

    Specifications

     Model  C30-30-20L
     Temperature range  Ambient to -30°C (No load)
     Electrical requirements  220V 60Hz 1-PH 9A, 1,990 watts (Not compatible with 50Hz power)
     Cooling capacity
     (Assuming working environment
    25°C/77°F)    		  @ 32°F/0°C: 2,800W
     @ 14°F/-10°C: 1,800W
     @-4°F/-20°C: 1,000W
     @-22°F/-30°C: 500W
     Compressor  Make: Panasonic
     Power: 208-230V 60Hz 1-PH
     Number of compressor: one
     Refrigerant: R410A
     Recirculating pump  Type: Centrifugal
     Output: 100 watts
     Pumping speed: 20 L/min or 5.3 gallon/min
     Maximum head: 20 feet or 6 meter
     Maximum pressure: 5.8 psi
     Coolant outlet pressure  Displayed on the built-in mechanical pressure gauge
     Reservoir  Material: Type 304 stainless steel, polished
     Chilling fluid connection: 3/8" hose barb x 2
     Capacity: 30 liters or 8 gallons
     Dimensions: 23 x 15 x 7" (WxDxH)
     Temperature controller

     Type: Digital microprocessor PID controlled
     Display unit: Celsius °C
     Temperature accuracy: +/- 2°C
     Temperature range: Ambient to -30°C
     Temperature sensor type

     Pt100
     Housing  Powder coated type 42 stainless steel
     Recommended coolant  For 50°F/10°C or higher:
    distilled water
     Between 50°F/10°C and -22°F/-30°C:
    50% ethylene glycol + 50% distilled water
     Working environment  -15°C/5°F to 25°C/77°F, at <66% humidity
     Built-in swivel casters  Four
     Unit/shipping dimensions   30 x 19.5 x 34" / 38 x 25 x 45" (WxDxH)
     Unit/shipping weight  220 Lbs / 280 Lbs
     Safety  Compressor over-temp protection
     Compressor delay start protection
     Short circuit and ground protection
     Over-current protection
     Recommended for rotary evaporators  Ai 20L SolventVap rotary evaporators
     Warranty  One year
     Compliance  UL 61010-1 :2012 Ed.3+R:29Apr2016
     CSA C22.2#61010-1 :2012 Ed.3