Description
*Item is not in stock. This item normally carries a 5-10 day lead time.
HIGH PURITY SOLVENTS, LC-MS GRADE SOLVENTS
- extensive quality control to ensure that they meet our specifications
- low solvent and metal impurities for reduced interference with delicate, minute or unknown samples
- minimal organic and trace metal contamination, which results in higher ionization efficiency, lower adduct formation and easier data interpretation
- LC-MS tested
Property | Value |
---|---|
gC Analysis | 99.9 % min. |
lC-MS Negative Mode (as 4-nitrophenol) | 50 ppb max. |
lC-MS Positive Mode (as reserpine) | 50 ppb max. |
refractive Index (20ºC) | 1.3766 - 1.3778 |
residue | 1 mg/L max. |
trace Metals | Passes test |
uV Cutoff | 205 nm max. |
water by Karl Fischer Titration | 0.05 % max. |
vaporPressure(Torr)at20°C | 32.4 |
Properties
Property | Value |
---|---|
Boiling Point/Range | 12.0 %(V) |
Certification | LC-MS, HPLC |
Color | Colorless |
Density | 0.785 g/cm3 (20 °C) |
Flashpoint | 12 °C |
Form | Liquid |
Grade | LC-MS Grade |
Incompatible Materials | Strong acids, Ethylene oxide, Strong oxidizing agents, May attack many plastics, rubbers and coatings, Keep away from metals, Isocyanat |
Lower Explosion Limit | 2.0 %(V) |
Melting Point/Range | -88 °C |
Partition Coefficient | No data available |
Purity Percentage | 99.90 |
Purity Details | >99.90% |
Solubility in Water | Completely soluble |
Upper Explosion Limit | 12.0 %(V) |
Vapor Density | 2.1 |
Vapor Pressure | 44 hPa (20 °C) |
Viscosity | 2.1 mPa.s (25 °C) |
pH-Value | Not applicable |
Product Line | LC-MS |
Storage Temperature | Ambient |
Safety Information
Property | Value |
---|---|
Hazard Class | 3 |
Package Group | II |
UN ID | UN1219 |